Summary: The difference between Signal mode and Direct mode is: we only need to connect the EVB with the test AP created by AP, then AP will have ...
The difference between Signal mode and Direct mode is: we only need to connect the EVB with the test AP created by AP, then AP will have a menu to test TX and RX related. Its aim is to figure out if the actual running power is matching what you want, RX path has no RF de-sense in a normal running mode. If signal mode passed all the RF standard, we can have a confidence that current RF path include TX and RX, current RF configuration like NVRAM have no critical issues. We can move the product into next long-run function tests.
Which EVB is for the tests?
I choose 43340 because it has 2.4G and 5G together.
How to set 8860C before test.
1. Set the static IP address
2. configuration .
Which means creating a AP at 153 channel with 6M rate and power is -15dbm.
After AP created we use command to join the AP, then we can do the test .
Which application is needed for the tests?
I used the command console for the test because we can use a lot of embedded commands to join a specific AP and do some command input.
And we are using the normal firmware for the test, please see the command output.
test.console-BCM943340WCD1 download run
Which commands are needed before the tests?
After connection established “scan_suppress 1” , “roam_disable ” are preferred .