About recording data of Radar Fusion GUI

[shoko_s]

Hello, 

I have some question about the recording data of Radar Fusion GUI. 

I can get the following files by selecting "Start Recording" in "Raw data Only" mode; 

***.raw.bin
***.raw.txt  (Normalized ADC signal data)
***.json

Please let me know how to use  ***.raw.bin and ***.json file. 

Please advise. 

Regards, Shoko

[Pugitha_N · Accepted solution]

Hi @shoko_s,

1) The Fusion GUI has an option to record the data, this recording is stored in the .bin file. You can playback the recording by uploading these .bin files to Fusion GUI.

Click the above shown button to load .bin file to GUI.

2) .json file stores the Radar configurations (PRT, PW, Gain etc.). You can use the .json file to load saved settings to Fusion GUI.

Best Regards,

Pugitha.

[shoko_s]

Hello Pugita, 

Thank you for quick reply. 

I understand your response. 

Thanks for your help. 

Shoko