USB005 latest FW

[tony567]

hi, Infineon,

    could you advise the latest USB005 FW? and provide the latest FW also, thank you.

[Nishanth · Accepted solution]

Hello @tony567,

The recent firmware update will be downloaded automatically when PowIRCenter is installed.

The GUI will prompt the user to update the application firmware if the GUI detects the current version is out-of-date.

Please click the following link for instructions on installing the PowIRCenter software and updating the firmware for "USB005"

Click here 

Please feel free to reach out to us if you need further clarification on this topic. 

Regards,

Nishanth Kulkarni

[tony567]

Hi, Nishanth

    the current version I used is USB005_PowIRCenter v59.28..hex, it seems there is a version of 59.3 or above? how could get 59.3 or above? can't update to 59.3 or above through GUI, it is used on TDA38640/XDPE152C4C/XDPE15284C, this is for the latest platform eagle stream

[Nishanth]

Hello @tony567,

PowIRCentre will not support TDA38640/XDPE152C4C/XDPE15284C parts.

Kindly download XDPDesigner from the Infineon developer center from the link below.

Click here 

XDPDesigner will have the recent firmware update required for TDA38640/XDPE152C4C/XDPE15284C parts.

Please feel free to reach out to us if you need further clarification on this topic. 

Regards,

Nishanth 

[tony567]

Hi, Nishanth,

    I have installed the latest 2022/7 toolbox with PowIRCentre/XDPDesigner/PowerCode, but they can't upgrade the USB005 FW to above 59.28, so where could I download the version 59.3? thanks.