- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am using Mbed studio v0.6.0 and mbed OS v5.14. The design.modus files in mbed OS are using Design version="11". Device Configurator v1.1.0 build 291 does not support the design file version. I get an error that says "Design file version '11' exceeds schema version .10." when I try to open a design.modus file.
How can I get a version of the Device Configurator that supports Design version="11"?
Thanks
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sorry, my bad. I seemed to have updated to a wrong commit. I checked all the release versions and anything less than or equal to 5.13.0 is compatible with MT1.1. BSP specific code has been added from 5.13.1 and they might cause problems when used with MT1.1.
Please revert to an older version by using the following command:
git clone --branch mbed-os-5.13.0 https://github.com/ARMmbed/mbed-os.git
For more information on ModusToolbox2.0 release, keep an eye on this page: https://www.cypress.com/products/modustoolbox-software-environment
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Right-click and open design.modus file in your favorite editor. Change the design version from '11' to '10' as highlighted below:
Let me know if it helps!
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
No, did not help. Now the error is "Device '' is not supported"
<Device mpn="CY8C624ABZI-D44">
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
No, did not help. Now the error is "Device '' is not supported"
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The latest mbed-os versions have changed the target files provided by Cypress to include board support package (BSP) flow which will be available only as part of ModusToolbox 2.0 workflow which will be released soon!
Please revert to an older version of mbed-os (5.13.2) for MT1.1.
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
mbed-os (5.13.2) does not have TARGET_CY8CPROTO_062_4343W and appears to have the same version issue for TARGET_CY8CMOD_062_4343W. Any chance I can get a beta version of ModusToolbox 2.0? This is currently for a "proof-of-concept" project using the "CY8CPROTO-062-4343W" board.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sorry, my bad. I seemed to have updated to a wrong commit. I checked all the release versions and anything less than or equal to 5.13.0 is compatible with MT1.1. BSP specific code has been added from 5.13.1 and they might cause problems when used with MT1.1.
Please revert to an older version by using the following command:
git clone --branch mbed-os-5.13.0 https://github.com/ARMmbed/mbed-os.git
For more information on ModusToolbox2.0 release, keep an eye on this page: https://www.cypress.com/products/modustoolbox-software-environment
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Okay, the "proof-of-concept" project has been changed to use FreeRTOS until released ModusToolbox tools catch up to Mbed OS.