Solved: Using QT Creator with PSOC 5 on a Macintosh.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
WaMa_286156
Level 5
Level 5
First comment on blog 100 replies posted 50 replies posted

This will roughly apply to Linux and Windows, but your mileage will vary.

I followed Rolf NooteBooms posts about using VSCode with the PSOC5 using the OneThinx setup.  I was able to modify it to work with more of a standardized PSOC5 project, allowing you to switch from PSOC Creator to VSCode and back again. I keep a VM with the schematic up while I work on the code and debug on the Mac natively.  (Also a few notes about Big Sur, which has made development jobs much harder.)

Once that worked, I was able to get it working with QT Creator.  If you are interested, the setup information for all the above is on my blog at: https://socmaker.com/?p=1039

There is a series of 3 posts to read for the entire setup.  

Enjoy!

Screen Shot 2022-01-17 at 4.31.33 PM.jpg

0 Likes
0 Replies