i'm working on an old project developed for PSoC1 device [CY8C21234] which configures and scans 4 touch buttons with the use of the active shield.
To enable the shield, in this project, the "RDI0LT1" register is written, at the beginning, with the value of "0x33". Which is the value to write to disable the "active shield" and to use the ground as reference for the touch button? I've not found docs where this register is described.
P.S.: I'd like to disable the shield as reference for the button in the software because i'm trying to use a new keyboard without the shield.
Many thanks and regards