- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello everyone,
I'd like to create an arbitrary wave type from a file using the WaveDAC8.
The datasheet of the component doesn't give detailed explaination how to proceed and
there is also no explaination about the meaning of the numbers (255 1 246 253.....for instance) we should put into file.
Thanks for your help
Solved! Go to Solution.
- Labels:
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Mohamadou,
The Wavedac component is created using a VDAC component and a DMA block. The 8 bit VDAC can take values from 0 to FF(255) which will be passed with the help of the DMA clocked at the rate your require. This is how the waveform is generated. I hope this explains what is the significance of the values you give. You have an option to draw the waveform you need in the component.
Best Regards,
VSRS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Mohamadou,
The Wavedac component is created using a VDAC component and a DMA block. The 8 bit VDAC can take values from 0 to FF(255) which will be passed with the help of the DMA clocked at the rate your require. This is how the waveform is generated. I hope this explains what is the significance of the values you give. You have an option to draw the waveform you need in the component.
Best Regards,
VSRS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks a lot, VSRS!
That was really helpful.
Regards