Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

PSoC™ 5, 3 & 1 Forum Discussions

Xeyow
Level 1
Level 1
First question asked Welcome!

Hello,

I have a PSOC5 Prototyping kit (https://www.cypress.com/documentation/development-kitsboards/cy8ckit-059-psoc-5lp-prototyping-kit-on...) and I want to develop a robot based on that MCU.  I need a 3D Model for this board in order to see if it fits in my enclosure.

I tried opening the .brd file in Allegro but the 3D model is unusable.

Where could I get a 3D model of it?

Thanks!

0 Likes
1 Solution
SampathS_11
Moderator
Moderator
Moderator
250 sign-ins 250 solutions authored 5 questions asked

The dimensions of CY8CKIT-059 are Length - 120mm, Width - 30mm, Height - 10mm. These are approximate values, but the error is on the bigger side.

We do not have a 3D model file for this kit, since we did not intend for this kit to be used as a sub-assembly in another product. The .brd file is a PCB layout file, which can be opened in Allegro.

Best regards,

Sampath Selvaraj

 

View solution in original post

1 Reply
SampathS_11
Moderator
Moderator
Moderator
250 sign-ins 250 solutions authored 5 questions asked

The dimensions of CY8CKIT-059 are Length - 120mm, Width - 30mm, Height - 10mm. These are approximate values, but the error is on the bigger side.

We do not have a 3D model file for this kit, since we did not intend for this kit to be used as a sub-assembly in another product. The .brd file is a PCB layout file, which can be opened in Allegro.

Best regards,

Sampath Selvaraj