- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I download wrong HEX file into CY8C4247LQI-BL483 chip, then the chip cann't connect to JTAG.
i measure the current and find the chip current is 6mA when power on(very short time), then drop to 5nA, and never up.
hex file name: "PRoC_BLE_CapSense_Slider_LED" form demo program.
download tools: J-Link
Download software: J-flash
Downloade interface: SWD
please help tell me how to connect JTAG(SWD mode) and erase chip, thanks.
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
CY8C4247LQI-BL483 provides EraseAll command on SWD. Can you try that ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
CY8C4247LQI-BL483 provides EraseAll command on SWD. Can you try that ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
i can't use EraseAll command on chip,because i can't connect JTAG(SWD), the chip power current only 5nA@3.3V, could you tell me another way to make JTAG(SWD) connection? And could you tell me how can boot not form flash?did it support boot from RAM?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
sorry, its 5uA&3.3V
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
PSoC does not have execute from RAM option.
Thanks,
Hima