Trouble getting computer to recognize MiniProg3

[Jonny-Fission]

Hello, my engineering contractor provided me with a MiniProg3 and instructions to load demo software onto our developmental device.  My device manager lists the MiniProg3 as "Unknown Device", so I attempted to update the drivers.  My instructions state that after loading the PSoC software and connecting the device, the initial drivers will be updated with the most current.  In this case, there are no drivers on my MiniProg3.  How can I rectify this?

[Yugandhar]

Hello,

Could you please refer to the below Troubleshooting KBA and please let me know if this helps ?

https://community.infineon.com/t5/Knowledge-Base-Articles/Troubleshooting-PSoC-3-4-5LP-Programming-D...

Also, please refer to the below thread.

https://community.infineon.com/t5/PSoC-5-3-1/PSoC-MiniProg3-USB-Device-not-recognized-Windows-10/td-...

Thanks,
P Yugandhar.

[Jonny-Fission · Accepted solution]

Thanks Yugandhar!
I was able to get connected yesterday by installing the most advanced PSoC
software, then getting the MiniProg3 to update its drivers. I appreciate
your links and they were pointing me in the right direction.

Cheers,
Jon

Jon Fisher and Cally McConnell
Wizard Tag LLC

1395 S Columbia Rd

Grand Forks, ND 58201

(701) 330-5116

jon@wizardtag.com

cally@wizardtag.com