- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Sirs and Madams,
We are considering the adoption of the PSoC4 series.
However, it is a condition of adoption that flow implementation is possible.
Reflow profile URL
https://www.cypress.com/file/41231/download
I know there is a Cypress reflow profile, but I have never seen a Cypress flow profile.
Is it possible to provide us with a Cypress flow profile?
Is it deprecated to flow mount a TQFP (0.8mm pitch) package?
Regards、
Solved! Go to Solution.
- Labels:
-
PSoC 4 MCU
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Attached herewith is an example actual profile we used for TQFP 100 (14x14). Hope this is helpful.
Best Regards,
Vasanth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We are checking this internally. Please give us some time to get back to you.
Best Regards,
Vasanth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Vasanth-san,
The file you attached is a "reflow" temperature profile.
Do you have a "flow" temperature profile?
The implementation requirements for the TQFP package do not state that flow is not recommended, but should we still understand that the TQFP(0.5mm pitch or 0.8mm pitch) package does not recommend flow?
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Masashi San,
Unfortunately we do not have that.
Best Regards,
Vasanth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I understood.
Thank you for your support.
Regards,