PSOC4 BLE WLCSP underfill material review

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
BrKu_1344346
Level 1
Level 1
Distributor - Weikeng(GC)
5 replies posted First question asked First reply posted

Our customer want to do underfill process in their PCB, could you help confirm the material is OK or not.

1.     Zymet X2821 ?
2.     Fuji UF317H ?

If not, could you provide the recommend underfill material.

Brian

0 Likes
1 Solution
GyanC_36
Employee
Employee
250 replies posted 100 replies posted 50 replies posted

We has not verified the Underfill process for this module.

The provided materials, we do not have the data, but seeing from the rough description, the first one, flow-ability seems too high, the PCB edge area maybe cannot be filled well. The second one, it’s UV curing process, the gap area under the PCB cannot be cured well.

View solution in original post

1 Reply
GyanC_36
Employee
Employee
250 replies posted 100 replies posted 50 replies posted

We has not verified the Underfill process for this module.

The provided materials, we do not have the data, but seeing from the rough description, the first one, flow-ability seems too high, the PCB edge area maybe cannot be filled well. The second one, it’s UV curing process, the gap area under the PCB cannot be cured well.