- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I bought a evaluation board iridium 9645 ( IRIDIUM9645TPMI2CTOBO1), with a SLB9645 TPM 1.2, but I can't find any datasheet to plug this board on a raspberry pi 3B (40 pins header).
Could you provide the datasheet? If there is no datasheet, could you tell me what is the interest of the two jumpers, the 28 pins header, the 6 pins headers? The 26 pins header is for raspberry?
Where should I plug it on the header of my raspberry pi 3B, and in what way should I plug it?
Regards,
Nuliel
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Nuliel,
Our datasheets all are on MyICP but we need the NDA to grant your access. You can contact with your distributor.
For develop on Raspberry Pi, we have github: https://github.com/Infineon/optiga-tpm.
But there are application notes only for 9670.
for the chip of 9645:
pin-28: gnd
pin-6: nc
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Nuliel,
Our datasheets all are on MyICP but we need the NDA to grant your access. You can contact with your distributor.
For develop on Raspberry Pi, we have github: https://github.com/Infineon/optiga-tpm.
But there are application notes only for 9670.
for the chip of 9645:
pin-28: gnd
pin-6: nc
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Nuliel,
Please let us know if your query was resolved. We will lock the thread in 3 days. In case your problem is not resolved, please create a new thread and we will be happy to help.