- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What are the thermal resistances junction-to-ambient, junction-to-case, junction-to-board, etc. of S29PL127J70BFI040 ?
What is absolute maximum junction temperature ?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Thank you for contacting Infineon Community. Please see below.
The Theta JA is 26 C/W
The Theta JB is 19 C/W
The Theta JC is 6.5 C/W
Tj = 92.1 C
Thank you
Regards,
Bushra
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Thank you for contacting Infineon Community. Please see below.
The Theta JA is 26 C/W
The Theta JB is 19 C/W
The Theta JC is 6.5 C/W
Tj = 92.1 C
Thank you
Regards,
Bushra
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks.
According to datasheet:
Storage Temperature Plastic Packages –65°C to +150°C
Ambient Temperature with Power Applied –65°C to +125°C
Absolute maximum junction temperature should be higher than 125°C. Why is it low as 92.1°C ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
There is a slight error in Bushra's calculation. The S29PL127J70BFI040 has an industrial temperature grade rating of -40C to +85C. Therefore, the Maximum Operating Junction Temperature is, Tj = Ta + (Pd x ja) , where :
Ta = 85 C
Pd(max) = 252 mW (70mA x 3.6V)
ja = 26 C/W
Therefore, Tj = (252mW x 26) + 85 = 91.55 C
It is not recommended to operate the S29PL127J beyond its specified maximum operating range, especially at 125C, as erratic operation may occur due to operating beyond the specified temperature range, but no permanent or irreversible damage will result.
Best regards,
Albert
Cypress Semiconductor corp.
An Infineon Technologies Company.