- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I think the difference between S29AL016J70TFI010 and S29AL016J70TFI020 is the difference between top boot sector device and bottom boot sector device. Is there any revision required when using S29AL016J70TFI010 when using S29AL016J70TFI020?
Solved! Go to Solution.
- Labels:
-
Memory Nor Flash
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yukitaka,
Yes, you are correct. You should be able to use either model 01 or model 02, without any problems. However, please do keep in mind that the Device ID's are different.
S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)
Best regards,
Albert
Cypress Semiconductor Corp.
An Infineon Technologies Company
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yukitaka,
Thank you for contacting Cypress Semiconductor Corp.
There is no revision that is required when using the S29AL016J70TFI010, when using S29AL016J70TFI020.
However, please do keep in mind that the device ID's are different between top boot and bottom devices.
The S29AL016J datasheet is attached for your reference and review.
S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)
Best regards,
Albert
Cypress Semiconductor Corp.
An Infineon Technologies Company
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for your reply. It seems that it can be used without problems.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yukitaka,
Thank you for contacting Cypress Semiconductor Corp.
There is no revision that is required when using the S29AL016J70TFI010, when using S29AL016J70TFI020.
However, please do keep in mind that the device ID's are different between top boot and bottom devices.
The S29AL016J datasheet is attached for your reference and review.
S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)
Best regards,
Albert
Cypress Semiconductor Corp.
An Infineon Technologies Company
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Yukitaka,
Yes, you are correct. You should be able to use either model 01 or model 02, without any problems. However, please do keep in mind that the Device ID's are different.
S29AL016J70TFI01x : model '01' = VCC = 2.7 - 3.6V, top boot sector device (CFI Support)
S29AL016J70TFI02x : model '02' = VCC = 2.7 - 3.6V, bottom boot sector device (CFI Support)
Best regards,
Albert
Cypress Semiconductor Corp.
An Infineon Technologies Company