- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Now I have a motor whose rated current is only 0.5A and rated voltage input is 220V. Now I want to increase the starting torque. Besides increasing the starting current, is there any other way? Because now when I adjust the starting current to 100%, the starting torque is still not large enough, I want to increase the starting torque. The following is my parameter configuration.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @wang1,
Please make sure to follow the points mentioned in section 4.3 Difficulty to start the motor of iMOTION Software Reference Manual
Please refer to application note: AN2020-12 Driving high inertia loads with iMOTION™2.0
Can you please let us know if the above steps help.
Thanks,
Krupashankar
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @wang1,
Please make sure to follow the points mentioned in section 4.3 Difficulty to start the motor of iMOTION Software Reference Manual
Please refer to application note: AN2020-12 Driving high inertia loads with iMOTION™2.0
Can you please let us know if the above steps help.
Thanks,
Krupashankar