- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
After a fresh install of ModusToolbox 3, I attempted to create every application for CY8CPROTO-062-4343W.
All applications that start with "IoT_Expert_", produced an "ERROR:Failed to create and export"
The end of the console report after running the "Create" is as follows.
...
Successfully created and exported "WiFi_TCP_Server" application.
Successfully created and exported "WiFi_UDP_Client" application.
Successfully created and exported "WiFi_UDP_Server" application.
Successfully created and exported "emFile_Filesystem" application.
ERROR:Failed to create and export "IoT_Expert_BLE_Scanner" application.
ERROR:Failed to create and export "IoT_Expert_Embedded_World_2021_Lesson_1" application.
ERROR:Failed to create and export "IoT_Expert_Embedded_World_2021_Lesson_2" application.
ERROR:Failed to create and export "IoT_Expert_Embedded_World_2021_Lesson_3" application.
ERROR:Failed to create and export "IoT_Expert_Embedded_World_2021_Lesson_4" application.
ERROR:Failed to create and export "IoT_Expert_Embedded_World_2021_Lesson_5" application.
ERROR:Failed to create and export "IoT_Expert_Embedded_World_2021_Lesson_6" application.
ERROR:Failed to create and export "IoT_Expert_Embedded_World_2021_Lesson_7" application.
ERROR:Failed to create and export "IoT_Expert_FreeRTOS_NTShell_Template" application.
ERROR:Failed to create and export "IoT_Expert_FreeRTOS_Template" application.
Greg
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In general, the IOT_Expert_ examples continue to be supported in the version of ModusToolbox for which they were created. They should work with version 2.3 or 2.4, for example. I am not that familiar with them.
So, I would not say support was "dropped" so much as there were a bunch of changes in ModusToolbox 3.0 tools and infrastructure, but the IOT_Expert_ examples were not updated to accommodate those changes.
It might be possible to convert those examples to 3.0 format, but as I mentioned I am not that familiar with them.
Here's the KBA about it: https://community.infineon.com/t5/Knowledge-Base-Articles/Migrating-ModusToolbox-applications-from-v...
However, as I am sure you have discovered by now, the default example applications for the CY8CPROTO-062-4343W BSP work out of the box. It might be a more productive experience using those examples and modifying the source code as appropriate to achieve the desired results.
Good luck!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In general, the IOT_Expert_ examples continue to be supported in the version of ModusToolbox for which they were created. They should work with version 2.3 or 2.4, for example. I am not that familiar with them.
So, I would not say support was "dropped" so much as there were a bunch of changes in ModusToolbox 3.0 tools and infrastructure, but the IOT_Expert_ examples were not updated to accommodate those changes.
It might be possible to convert those examples to 3.0 format, but as I mentioned I am not that familiar with them.
Here's the KBA about it: https://community.infineon.com/t5/Knowledge-Base-Articles/Migrating-ModusToolbox-applications-from-v...
However, as I am sure you have discovered by now, the default example applications for the CY8CPROTO-062-4343W BSP work out of the box. It might be a more productive experience using those examples and modifying the source code as appropriate to achieve the desired results.
Good luck!