- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
I have a question about the exemple codes that exist in Keil Software specifically "driving BLDC MOTOR in sensorless mode " code , so my question is : Can we use this exemple code with all evaluation boards TLE987X for exemple EVALB_VQFN or only for TLE9879 EVALKIT as it is shown in the video in infineon website ?
I mean in this code , is there some parameteres configured that works only with TLE987X Eval kit or it is standard code for driving BLDC motor in sensorless mode no matter the TLE987X Eval board used ?
Thank you .
Best regards.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Ghassen,
Yes, you can use the Keil Example software for TLE987x for any board in this family. You have to change the device in configuration and generate parameters in Config Wizard. Save these parameters and build the program.
Please, let us know if you need further clarification.
Thank you
Best Regards
Raj Chaudhari
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Ghassen,
Yes, you can use the Keil Example software for TLE987x for any board in this family. You have to change the device in configuration and generate parameters in Config Wizard. Save these parameters and build the program.
Please, let us know if you need further clarification.
Thank you
Best Regards
Raj Chaudhari
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Raj_C
Thank you for your quick response .
Can you tell me where exactly I need to change the board I am using? , and what type of parameters I need to specify in Config Wizard?
By the way in config Wizard I find Foc motor parameters (for sensorless code exemple) and I wanted to know if i need to change these parameters according to the motor I am using each time or the software code exemple is valid for all type of BLDC motors?
(You will find an attached screenshot for FOC motor parameters that I find in Config Wizard)
Thank you .
Best regards.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Ghassen,
Follow these steps to change the device in Keil.
1) Click on the 'Options for target' as shown in the picture.
2) Go to the device panel and select the desired MPN.
3) Go to Config wizard. Enter the parameters for your current BLDC motor (which you want to run) as per the datasheet. You need to change parameters every time you change the motor.
4) Save the parameters and rebuild the program and program the device.
Please, let us know if you need further clarification.
Thank you
Best Regards
Raj Chaudhari
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Raj_C
That's so clear , but still one crucial information for my project , is it possible to know how much ressources it takes to run this exemple code (RAM, flash and CPU)?
thank you .
Best regard.
Best regards.