Legacy microcontrollers Forum Discussions
As in the title, according to GB/T 34590, the latest version of GB 17674 puts forward mandatory functional safety requirements for automobile steering systems, as shown in the following figure:
I would like to ask all the big guys, are there any mature solutions and a basis for selecting relevant major chips to meet the steering system and the upcoming functional safety standards (braking, drive, thermal management)?
I'm already using DMA+SSC in one of the projects I'm working on, but I'm having trouble using the same configuration in another project. The problem is that in the second project I get DMA errors ME0DER/ME0SER related to DMA access to certain address spaces. The error exists even though all possible access permissions are given (DMA_ME0AENR=0xFFFFFFFF; and DMA_ME0ARR = 0x0000E0E0;). When comparing the working and non-working project, I found the following - the buffer of the working project is located in an address space starting with 0xA1000000, while the buffer of the non-working project is located in an address space starting with 0xD0000000. Unfortunately, at this stage of working on the project, I cannot modify the linker file and move all variables to the address space starting with 0xA1000000.
Question - can the DMA access addresses starting with 0xD0000000 and if so - how to enable it.
As in the title, how can I obtain the graphical development software and burning tools corresponding to the multi-phase PWM controller chip?
Hello, I have a problem with XC164 TwinCAN Controller. It functioned since many years very good, but now a customer need an changed function in handling the system. It is a CANopen project. Now the customer wants that the system react in blinking a LED when the HW is disconnected from CAN-Bus, so he can see this on an extern LED. The controller XC164 have 2 register, ACR and ASR. In ACR there is EIE for enabling the corresponding interrupt. In ASR there is the state BOFF. BOFF should be set when the CANcontroller is disconnected from bus, e.g. description. I read this state continously, but no BOFF is set, when I disconnect the system from CAN-Bus. What do I wrong, or what can I do to find a solution to react the system on disconnecting from CAN-Bus ?
Thanks for answering very fast, because the custumer needs the system. Reiner...Show Less
Hello, may I ask if IFX has an integrated solution for thermal management. For example, NXP's S912 can directly control 3 pumps, so there is no need to use 9877 to control the pumps separately. If there is such an integrated solution, please recommend it, thank you!
Does anyone have a clue where I can find USB Drivers for the Spansion MB-2100-01A-E SPEED BOX emulator?
Looks like this is impossible to get. I work on Win11 but eventually, I can get an older computer with win7/win10 whatever.
Please let me know if this is possible to find somewhere.
I checked this and it looks like it's your Infineon product, does anyone know what model it is? 5 pins about 2 mm in size, who knows the model, please let me know thank you
We understand part#TLE9879QXA40XUMA1 was discontinued on 2022-8-15.
Could you help check and advise when this discontinued product came on the market?
Thanks to Prot for their assistance, I have successfully resolved the issue. The problem arose when I was customizing certain faces in an after load hook. Perhaps as a result of changes in Doom's internals, the theme had not yet loaded, and I had to explicitly load it using after!
If modus themes are not working then retain old customers for employees & customer satisfaction, submit survey and get Free Whopper in-return at MYBKExperience
Hi i am Vijay, Hardware service engineer
I designed a circuit with aurdino nano and it is working fine. Now i want to replace aurdino nano with infineon chip, please advice the compatabile infineon chip with GPIO's availability and program details so that i can replace the same.