application of CN2100

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
JiLi_4142596
Level 1
Level 1
First reply posted First question asked

How to design the circuit of user system with MB96F346, which used to be connect with CN2100 debug interface for simulation?

0 Likes
1 Solution
Roy_Liu
Moderator
Moderator
Moderator
5 comments on KBA First comment on KBA 10 questions asked

MB96F346 is 16FX family features a 16-bit CISC architecture MCU, 16FX family MCU is supported only for the customers who have already adopted any of the products. However, if you need to design your circuit with this device, you can refer to the materials on the product family webpage:

https://www.cypress.com/products/16fx

Traveo MCU is recommended for new design - https://www.cypress.com/products/cypress-traveo-32-bit-arm-automotive-microcontrollers-mcus

Contact one of your local Cypress distributors if needed https://www.cypress.com/cypress-franchised-distributors

Roy Liu

View solution in original post

0 Likes
3 Replies
Roy_Liu
Moderator
Moderator
Moderator
5 comments on KBA First comment on KBA 10 questions asked

MB96F346 is 16FX family features a 16-bit CISC architecture MCU, 16FX family MCU is supported only for the customers who have already adopted any of the products. However, if you need to design your circuit with this device, you can refer to the materials on the product family webpage:

https://www.cypress.com/products/16fx

Traveo MCU is recommended for new design - https://www.cypress.com/products/cypress-traveo-32-bit-arm-automotive-microcontrollers-mcus

Contact one of your local Cypress distributors if needed https://www.cypress.com/cypress-franchised-distributors

Roy Liu
0 Likes

can you help me to chose one chip instead of mb90F548 in traveo family, which i use 3 uart interface, some timers, some external interruptes and IO ports.

my company is focus on packaging machine.

0 Likes
Roy_Liu
Moderator
Moderator
Moderator
5 comments on KBA First comment on KBA 10 questions asked

If "3 uart interface, some timers, some external interruptes and IO ports" is your requirement, I recommend you have a look at PSoC4 series MCU -

https://www.cypress.com/search/psg/1297#/

Roy Liu
0 Likes