- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
我们在使用S6J324 DLP时发现在开启图形显示之后,无法实时校准flash的DLP功能,请问这部分需要如何操作?
When using the S6J324 DLP, we found that the DLP function of the flash cannot be calibrated in real time after the graphic display is turned on. How do I need to do this?
当开启图形显示之后.操作DLP会导致芯片复位.
When the graphic display is turned on, operating DLP will cause a chip reset.
截止到目前.我们没有从FAE处得到一个合理的解决方案.
As of now, we have not got a reasonable solution from the FAE.
如果有解决的方式请联系我的邮箱jianzhi.zhao@hljtyw.com
If there is a solution, please contact my email jianzhi.zhao@hljtyw.com.
Solved! Go to Solution.
- Labels:
-
Traveo
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
我们S6J3200的硬件使用手册有明确指出在执行校准时是不能访问外部Flash的。请参考S6J3200硬件平台手册的第52章4.4.4小结了解更多信息。
Best regards,
Amy Wang
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
我们S6J3200的硬件使用手册有明确指出在执行校准时是不能访问外部Flash的。请参考S6J3200硬件平台手册的第52章4.4.4小结了解更多信息。
Best regards,
Amy Wang