CY9D560_About setting to use the base timer as PWM function

[noha_3407421]

Hi,

Customer wants PWM output using base timer.

I understand that the following registers should be set.

  1)TMCR

  2)TMCR2

  3)STC

  4)STCC

  5)STCS

  6)PCSR

  7)PDUT

  8)TMR

I understand the address of each channel as follows.

  0xB080_8000 to 0xB080_AFFF (ch0 to ch11)

Is this understanding correct?

Best Regards,

harukawa

[Takashi_M · Accepted solution]

Yes, your understanding is correct.

thanks.