- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Sir,
Now my customer is beginning their project using CY9AF116NAPMC-G-MNE2. Now they have an question in CSV . In PDL , CSV is OFF .
But in 002-05586 Mannual main part , it discribes as flows:
Does the CSV work after starting?
Thanks.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Yaxi,
yes, the CSV function is automatically, but FCS function is started by user.
you can see the CSV register:
CSV_CTL:
bit1: SCSVE -- Sub CSV function enable bit
bit0: MCSVE -- Main CSV function enable bit
the initial values are '1', mean enable these functions.
The PDL just provides APIs to enable/disable these functions after MCU startup.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Yaxi,
yes, the CSV function is automatically, but FCS function is started by user.
you can see the CSV register:
CSV_CTL:
bit1: SCSVE -- Sub CSV function enable bit
bit0: MCSVE -- Main CSV function enable bit
the initial values are '1', mean enable these functions.
The PDL just provides APIs to enable/disable these functions after MCU startup.