XMC7000 MCU: Debug and program with J-Link - KBA234465
Moderator
Jan 15, 2023
11:47 PM
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Jan 15, 2023
11:47 PM
Community Translation: XMC7000 MCU: J-Linkを使用したデバッグとプログラム - KBA234465
Do the following for XMC7000 programming in J-Flash and debugging in ModusToolbox™ Embedded Workbench.
- Prepare the compilation environment.
- Download J-Link software V7.84b or later version from the SEGGER website:
https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack
- Open a XMC7000 ModusToolbox™ project, click Run > Run Configurations and select Debug(Jlink).
- Click Run.
-
Click XX Program(Jlink), then it will download the project into the chip.
Labels
Rate this article: