Attachments are accessible only for community members.
Unused serial inputs and outputs on HOTLink CY7B923/CY7B933
Anonymous
Not applicable
Jun 28, 2011
07:10 AM
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Jun 28, 2011
07:10 AM
Question: What should be done with unused serial inputs and outputs on HOTLink CY7B923/CY7B933?
Answer:
Unused serial outputs on CY7B923 can be either tied to Vcc or left floating to reduce power. One input of unused serial inputs on CY7B933 should be terminated to Vcc through a 1K-5Kohms resistor to assure that no data transitions are accidentally created.
For more information, please refer to "Frequently Asked Question About HOTLink" application note on our website.
Useful Link:
HOTLink Transmitter/Receiver (Attached below 38-02017_0D_V)
Frequently Asked Questions about HOTLink (www.cypress.com/cfuploads/support/app_notes/faq.pdf)
Labels
- Tags:
- phys
Rate this article:
Contributors
-
This widget could not be displayed.Anonymous