Author: ShifangZ_26 Version: **
What is the default pin assignment and I2C slave address for Host Process Interface (HPI) based on CCGx SDK?
The following table provides the details based on CCGx SDK:
I2C Slave address
I2C Slave Address of CCG’s HPI Interface is configurable based on the state of the SWD Clock IO as follows:
• If SWD Clock IO is floating, Slave address is 0x08.
• If SWD Clock IO’s state is low, Slave address is 0x40.
• If SWD Clock IO’s state is high, Slave address is 0x42.