Translation - Japanese: S29GL-N、S29GL-SおよびS29GL-Tのライト バッファ プログラミング シーケンスの中止 - Community Translated (JA)
How can the Write Buffer Programming Sequence be aborted for S29GL-N, S29GL-S, and S29GL-T Families? Answer: The Write Buffer Programming Sequence can be aborted in the following ways:
Write Buffer Abort condition can occur by any of the condition above. Write Buffer Abort will never occur if the software is written properly.
The abort condition is indicated by DQ1 = 1, DQ7 = DATA# (for the last address location loaded), DQ6 = toggle, and DQ5 = 0.
A Write-to-Buffer-Abort Reset command sequence must be written to reset the device for the next operation.
Flash device: S29GL064S70TFI030
SA125: 7D0000h to 7DFFFFh
If the Write Buffer Programming sequence is issued across multiple pages, as in Case #3 and #4 shown above, the WB Programming operation will be aborted.