- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I am looking for rated or maximum current of Vcc1 and Vcc2. I have checked datasheet. I only see Quiescent currents (IQ1 and IQ2).
What are the values for supply currents (Icc1 and Icc2)? The datasheet is attached.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @meakdogan ,
The secondary side input current of VCC2 (ICC2) would be equal to Iq2 + the current needed to drive the IGBT or MOSFET. The current required to drive your switching device would depend on your application design i.e., Vgs, Rg, switching frequency etc.,
However, maximum limits for the high level output peak current is specified in the datasheet for certain operating condition and the same has to be considered while designing your gate drive circuit components.
I'm checking with the internal team for primary side input current value (ICC1) when the inputs are high. I'll update you soon.
Regards
Meghana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @meakdogan ,
The secondary side input current of VCC2 (ICC2) would be equal to Iq2 + the current needed to drive the IGBT or MOSFET. The current required to drive your switching device would depend on your application design i.e., Vgs, Rg, switching frequency etc.,
However, maximum limits for the high level output peak current is specified in the datasheet for certain operating condition and the same has to be considered while designing your gate drive circuit components.
I'm checking with the internal team for primary side input current value (ICC1) when the inputs are high. I'll update you soon.
Regards
Meghana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @meakdogan ,
Iq1 or ICC1, the input current from the primary supply VCC1 will be same as the value provided in the datasheet even while IN+ is high.
Please let me know if further clarification is needed on this topic.
Regards
Meghana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for help. both answers are more clear to me.