IRS25411S for Non-isolation LED lighting

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
andypark
Level 1
Level 1
10 sign-ins 5 sign-ins First reply posted

Hello

I want to implement non-isolated LED lighting using the IRS25411S device
Please let me know if you have application notes or data applied to actual products.

0 Likes
1 Solution
Guru_Prasad
Moderator
Moderator
Moderator
250 replies posted 100 solutions authored 25 likes received

Hello @andypark 

Thanks for providing the requirements. 

PFC stage you can use this reference document for your calculations. 

Buck converter stage you can use this reference document.

Both documents have the formulas so please calculate as per your requirement.

Both converters will help for your entire project design.

Thanks

Guru

View solution in original post

8 Replies
Guru_Prasad
Moderator
Moderator
Moderator
250 replies posted 100 solutions authored 25 likes received

Hello @andypark 

Thanks for writing to Infineon Community.

The Attached document will help you to design the LED drivers

Please download it from this link 

you can refer this Link also for LED application design considerations. 

In this attachment Fig-9 will help you for your designs 

Please let me know if you need any help 

Thanks

Guru

0 Likes
lock attach
Attachments are accessible only for community members.
andypark
Level 1
Level 1
10 sign-ins 5 sign-ins First reply posted

Dear Guru

Thanks for your support.

The link you sent was well received.
All I need is a Normal reference design guide.
For example, circuit diagram, Trans calculation formula, each part calculation formula, etc.

Please refer attached file(Competitor design guide)

Customer output information

Input voltage : AC90V~264V

Output voltage, current : 60V 240mA

0 Likes
Guru_Prasad
Moderator
Moderator
Moderator
250 replies posted 100 solutions authored 25 likes received

Hello @andypark 

Please provide us with complete requirements to us. which topology do you need it Isolated or nonisolated?

The reference design which you attached is isolated topology. In fact, Infineon has an isolation topology kindly click here.

Infineon don't have application board for  non isolated topology.

Please let me know if you need any help.

Thanks

Guru

 

0 Likes
andypark
Level 1
Level 1
10 sign-ins 5 sign-ins First reply posted

Dear Guru

I need Non-isolated topology.

If you have a calculation formula by Excel?

Please provide it to me.

0 Likes
Guru_Prasad
Moderator
Moderator
Moderator
250 replies posted 100 solutions authored 25 likes received

Hello @andypark 

Please let me know your complete requirements and specifications.

 which all are formulas you are looking for please let me know?

Thanks

Guru

0 Likes
lock attach
Attachments are accessible only for community members.
andypark
Level 1
Level 1
10 sign-ins 5 sign-ins First reply posted

Dear Guru

Customer requirements

VIN: 90VAC~264VAC
VOUT: 40~75V
IOUT: 240mA
PF: >0.9

I will send you competitor datasheets and example calculations in Excel.

0 Likes
Guru_Prasad
Moderator
Moderator
Moderator
250 replies posted 100 solutions authored 25 likes received

Hello @andypark 

Thanks for providing the requirements. 

PFC stage you can use this reference document for your calculations. 

Buck converter stage you can use this reference document.

Both documents have the formulas so please calculate as per your requirement.

Both converters will help for your entire project design.

Thanks

Guru

andypark
Level 1
Level 1
10 sign-ins 5 sign-ins First reply posted

Dear Guru

Thanks for your support.

I will make a design based on the data you sent. And I will contact you.

0 Likes