Error Launching command JLinkGDBServerCL.exe failed

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User20046
Level 1
Level 1
hello i have only been working with Dave for a short time and do not know how to solve my problem.

I hope I will be helped here.

System:
Win 10 64-bit
DAVE-IDE-4.4.2-64Bit

4556.attach

Thanks
0 Likes
1 Solution
jferreira
Employee
Employee
10 sign-ins 5 sign-ins First like received
Hi,

It seems the path to the JLinkGDBServerCL.exe is missing in your case.
In DAVE4, click on Windows>Preferences and type "segger".
You should see something similar to below picture.
4563.attach

Ensure that the folder contains the Segger software, that can be downloaded from https://www.segger.com/downloads/jlink/JLink_Windows.exe

Regards,
Jesus

View solution in original post

3 Replies
jferreira
Employee
Employee
10 sign-ins 5 sign-ins First like received
Hi,

It seems the path to the JLinkGDBServerCL.exe is missing in your case.
In DAVE4, click on Windows>Preferences and type "segger".
You should see something similar to below picture.
4563.attach

Ensure that the folder contains the Segger software, that can be downloaded from https://www.segger.com/downloads/jlink/JLink_Windows.exe

Regards,
Jesus

I followed this recommendation, the initial error that was related to Segger JLINK is gone, but a new error popped out:

Error in services launch sequence
Starting J-Link GDB Server timed out.

Any ideas.

0 Likes
User20046
Level 1
Level 1
Thank you so much. You have saved my day. 😄
0 Likes