- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Supporter
I want to translate the following KBA. Please confirm to my work.
Using TLE987x_EVALKIT at input voltage range above 17V (KA-03153)
Regards,
Nino
Solved! Go to Solution.
- Labels:
-
TLE987x_EVALKIT
- Tags:
- TLE987x_EVALKIT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Mohammed
The following shows the translation version of the targeted KBA.
Please confirm and double check.
Regards,
Nino
----------------------------------------------------------------------------------------------------------------------
17Vを超える入力電圧幅でTLE987x_EVALKITを使用(KA-03153)
17.3Vを超える供給電圧では、以下の様な設定を適応する必要があります:
- ADC2-TH0_3_UPPER.CH2 (VSD 過電圧閾値)
- ADC2-TH0_3_UPPER.CH1 (VS 過電圧閾値)
- MF-VMON_SEN_CTRL.VMON_SEN_SEL_INRANGE (VDH監視のためのアッテネータ要因)
必要な閾値の式は、TLE987x https://www.infineon.com/dgdl/Infineon-TLE9879QXA40-UserManual-v15_03-EN.pdf?fileId=5546d4624e24005f... ユーザーマニュアルで確認できます。
VDHはADC1で監視されているため、VLSBの計算の基準電圧は、VAREF(VBGではない)です。データ幅も、適宜に適応される必要があります(8または10ビット幅)。
Labels MOTIX™ MCU
Tags: EMBEDDED_POWER_IC KITS BOARDS TLE9879_EVALKIT tle987x Add tags
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Yutaka san,
Confirm to work on this KBA.
Thanks,
Mohammed.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Mohammed
The following shows the translation version of the targeted KBA.
Please confirm and double check.
Regards,
Nino
----------------------------------------------------------------------------------------------------------------------
17Vを超える入力電圧幅でTLE987x_EVALKITを使用(KA-03153)
17.3Vを超える供給電圧では、以下の様な設定を適応する必要があります:
- ADC2-TH0_3_UPPER.CH2 (VSD 過電圧閾値)
- ADC2-TH0_3_UPPER.CH1 (VS 過電圧閾値)
- MF-VMON_SEN_CTRL.VMON_SEN_SEL_INRANGE (VDH監視のためのアッテネータ要因)
必要な閾値の式は、TLE987x https://www.infineon.com/dgdl/Infineon-TLE9879QXA40-UserManual-v15_03-EN.pdf?fileId=5546d4624e24005f... ユーザーマニュアルで確認できます。
VDHはADC1で監視されているため、VLSBの計算の基準電圧は、VAREF(VBGではない)です。データ幅も、適宜に適応される必要があります(8または10ビット幅)。
Labels MOTIX™ MCU
Tags: EMBEDDED_POWER_IC KITS BOARDS TLE9879_EVALKIT tle987x Add tags
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Nino san,
Confirm to receive this KBA.
Thank you for your contribution.
Thanks,
Bindu.