Community Translations Forum Discussions
Dear Supporter,
I would like to translate the following KBA.
Could you confirm?
Best regards,
mac-SEKKY
Show Less
Dear Supporter,
I would like to translate the following KBA.
Could you confirm?
Best regards,
mac-SEKKY
Show LessHi,
I want to translate the following App Note to Japanese. Please confirm to my work.
"Application note - MOTIX TLE987x Motor Control FOC Demo"
URL: https://www.infineon.com/dgdl/Infineon-MOTIX_TLE987x_Motor_Control_FOC_Demo_App_Note-ApplicationNotes-v01_00-EN.pdf?fileId=8ac78c8c8929aa4d0189441becff46d3
This application is large and will be divided into three parts.
I would like to translate pages 1 through 26 in this case.
Best Regards,
Hayashi.K
Hi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Where to check when there are errors changing Build Configuration from Release to Debug"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Where-to-check-when-there-are-errors-changing-Build-Configuration-from-Release/ta-p/741600
Best Regards,
Hayashi.K
Hi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Short circuit safe operation area of IM241 CIPOS™ micro IPM series"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Short-circuit-safe-operation-area-of-IM241-CIPOS-micro-IPM-series/ta-p/740439
Best Regards,
Hayashi.K
Hi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Set and modify the stack size for PMG1 code examples in ModusToolbox™"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Set-and-modify-the-stack-size-for-PMG1-code-examples-in-ModusToolbox/ta-p/740409
Best Regards,
Hayashi.K
Hi,
I want to translate the following article to Japanese. Please confirm to my work.
KBA "Speed sensor's type of hysteresis"
URL: https://community.infineon.com/t5/Knowledge-Base-Articles/Speed-sensor-s-type-of-hysteresis/ta-p/740399
Best Regards,
Hayashi.K
Hi,Communites, I want to translate the following KBA239239 into Japanese.
Best Regards,
T. Shibutani / Nexty
Show Less
Hello,
I would like to translate below article into Japanese.
Please confirm to my work.
Thank you & Regards,
Masaya
Hello,
Please let me translate this article into Japanese if no one has been assigned yet.
Changing programming clock speed in ModusToolbox and Cypress Programmer – KBA232936
Best Regards,
ykawa
Show Less