Can Physically apply Newton's III 3rd third law of motion, as a cycle system in a Motor Engine Device?
3rd Thermodynamic Law Applicated in a Power-Plant Device. The Reaction at From of the Action. New Torque Power. Its a simple Plus Formula of the Interaction of the Two Powers: 1/Action, + 2/Reaction = Retrodynamic. / For every action there is an equal and opposite reaction.
RETRODYNAMIC Effect - Dextrogiro => vs <= Levogiro Phenomena Effect. / Rotor/RPM VS InFlow/Way. 2dn Thermodynamic Law Applicated in a Power-Plant Device. The Reaction at From of the Action. New Torque Power. Its a simple Pluse Formula of the Interaction of the Two Powers: 1/Accion, + 2/Reaction = Retrodynamic.
"Changing rotation inside a mass makes it possible to change its inertial properties. It is the equation for a jet motion without rejection of any mass.” Albert Einstein.
The formula of the Retrodinamic effect is a simple mathematical summation. What is Dextrogiro plus Levogiro, gives the result of the sum, of what is the total, which is the retrodynamic effect. But keeps doing Exponential.
The logic of creation of an inertial propulsion system is thus: Any motion is rotation ---- Rotation of a matter generates a space-time Torsion ---Torsion of space - time is described by Ricci torsion --- Ricci torsion is an inertial field-----the rest mass of any object is determined by its inertial field---- operating by fields and forces of inertia inside of mass we can create inertial propulsion system which moves according to the equation [m (t) dv/dt =-vdm/dt].
Newton's Third Law of Motion: III. For every action there is an equal and opposite reaction.
It is the sum of both (two) Forces - one to other.
To the Moderator:
Please delete last post from AdamGreen in the discussion
PsOC4 Project - Alarm Loop - Infineon Developer Community
It is SPAM!!!Show Less
To the Moderator:
Can you delete spam message from discussion thread:
unable to get real time capsense tuner functioning... - Infineon Developer Community
It's the message posted by visitor serpodrik, Oct 26, 2021 05:55 AM.
I like to suggest a useful a feature that I suggested when you first launched this site.
At the "HOME" page I can "Filter by board" the forum boards I have interest/experience in.
Selecting "GO" filters the boards as requested.
However, any action returning to "HOME" loses this filter selection. (Refresh, return from a board, etc) loses the filter selection.
The filter selection should persist for the entire logon session.
We should be allowed to make board filter selections that get loaded at logon.
This feature of board selection persistence is even more important now that the number of boards available on this forum has been expanded.
While composing a message using Android phone I accidentally copy/pasted some HTML code from another message. but now it appears that it is not possible to delete that pasted section on mobile!
CyDmaTdSetAddress(DMA1_TD, LO16((uint32)pBuffer), LO16((uint32)WaveGen_Data_PTR)); // RAM->PWM
recently I noticed that many useful answers in the Cypress Community forums contain links to pages which unfortunately are broken.
Here are a few examples:
- this link: http://www.cypress.com/?app=forum&id=2492&rID=109465 , found in this post: "Output debug messages to IDE?" (https://community.cypress.com/t5/PSoC-Creator-Designer-Software/Output-debug-messages-to-IDE/td-p/182459?start=0&tstart=0)
- this link: http://www.cypress.com/?id=4&rID=91995 , found in this post: "Debug output to IDE Output Tab ... or IDE logging? " (https://community.cypress.com/t5/PSoC-Creator-Designer-Software/Debug-output-to-IDE-Output-Tab-or-IDE-logging/m-p/176737)
- this link: http://www.cypress.com/?docID=44358 , found on the same post
- and so on ...
What all these broken link have in common, is that they lead to a landing page that warns that we are leaving the Community for an external site. After "accepting" the risk, we are taken to the Infineon+Cypress initial home page.
I suppose that the problem appeared after the Cypress-Infineon merger and the consequent redesign of their web sites.
Can anyone please explain me the "key" (the edit to apply) to convert the broken links into good ones?
I also tried to search for example for "docID=44358" (or also simply for "44358") within the Community or even on the whole Cypress/Infineon web site, with no luck.
Above posts (and their links) are currently very important to me, as I am trying to figure out how to send debug strings to a debug console in PSoC Creator, using the MiniProg3 and the SWV pin of a PSoC3.
Thank you very much!Show Less
Hi everyone. I am currently trying to test g-mail login process in Cypress and I tried everything I know and nothing seems to work. Going thru UI, POST method, google authentication.. None of those work. I am a newbie in QA testing and I need to complete this test in order to land a job. I have 5 more days to complete it. If anyone can help me with this I would really really appreciate it and it would make me really happy.Show Less