- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This webpage claims that CYBT-333047-EVAL is supported by ModusToolbox:
https://www.cypress.com/products/airoc-bluetooth-le-bluetooth
But Github does not list this Eval Kit Target:
https://github.com/Infineon?page=1&q=TARGET_
Is this kit supported? and if so, is there an Audio Gateway Master w/ I2S stream example for the kit?
Solved! Go to Solution.
- Labels:
-
ModusToolbox Bluetooth SDK
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Just like I figured... no Audio Gateway turnkey demo available for this module. You have to adapt the CYW20706 EVAL BSP to a CYBT-343026 EVAL and then use it. Also need to change default baud rate from 3Mbaud for FTDI on the CYW20796 to 115.2Kbaud for Cypress USB-UART on the 343026/333047 Eval kits. Plus need to turn off all switches on the PUART DIP switch to use the I2S bus.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @Yashu ,
Module CYBT-333047-EVAL is CYW20706 based, therefore you will have to search for CYW20706 supported code examples for CYBT-333047 module. After selecting the code example in ModusToolbox, please change the target board using Library Manager.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Just like I figured... no Audio Gateway turnkey demo available for this module. You have to adapt the CYW20706 EVAL BSP to a CYBT-343026 EVAL and then use it. Also need to change default baud rate from 3Mbaud for FTDI on the CYW20796 to 115.2Kbaud for Cypress USB-UART on the 343026/333047 Eval kits. Plus need to turn off all switches on the PUART DIP switch to use the I2S bus.