- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I have an AURIX starter kit TC277 V1.0 board, and I'm facing an issue running the Blinky_LED_1_KIT_TC277_TFT AURIX project.
When I run the debug, I get this error message :
Starting Debugger...
The debug instrument IO could not be initialized.
The GDI debug instrument provided the following error message.
An internal error has occurred.
When using the DAS Device Scanner I get a NO DEVICE
Am I missing something in the Blinky_LED_1_KIT_TC277_TFT project?
Furthermore, when following this documentation :
I see that the 4th step says : Three Power LEDs should be on. However after I connect the board to the pc and to the power supply, the LEDs are off, is that something normal?
Thank you in advance for your help.
Solved! Go to Solution.
- Labels:
-
AURIX
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Yassir,
Thanks for enquiry.
Could you please check your Power and Osc pins with multimeter and oscilloscope first? You can find related info from below link:
If you have no myicp account, please register one and apply for the access.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Yassir,
Thanks for enquiry.
Could you please check your Power and Osc pins with multimeter and oscilloscope first? You can find related info from below link:
If you have no myicp account, please register one and apply for the access.