cancel
Showing results for 
Search instead for 
Did you mean: 

AURIX™

Louis_LEE
New Contributor
Hello, everyone.

I have tried to work TFT lcd on TC237 app-kit since 2 weeks ago.
I have used the demo code for TC237 app-kit which is provided from infineon.
It has worked well. but I only wanna extract the code for operating TFT because of My project.
So, I have tried to extract TFT function codes from the demo files.

However, My TFT has displayed continuous thin black lines like below.
I copied and pasted this exact same codes on new project for TFT test.
I think it has QSPI communication problems by unknown errors. but I have exactly copied the TFT code work-well .

Please give me your opinion about this problem.
How can I solve this problem?

4770.attach
0 Likes
1 Reply
User20509
New Contributor II
Hi
Can you please tell me which IDE you have used for initializing TFT LCD?
I am using Aurix IDE, but unable to lit my LCD. I don't have any sample code.
My hardware is TC387QP.

If you have any sample code for that for Aurix IDE, can you please share it with me?

Thanks in advance.

ljs6040 wrote:
Hello, everyone.

I have tried to work TFT lcd on TC237 app-kit since 2 weeks ago.
I have used the demo code for TC237 app-kit which is provided from infineon.
It has worked well. but I only wanna extract the code for operating TFT because of My project.
So, I have tried to extract TFT function codes from the demo files.

However, My TFT has displayed continuous thin black lines like below.
I copied and pasted this exact same codes on new project for TFT test.
I think it has QSPI communication problems by unknown errors. but I have exactly copied the TFT code work-well .

Please give me your opinion about this problem.
How can I solve this problem?

4770.attach
0 Likes