TLE9255 Linux driver

[KeTs_2342536]

Hi,

Customer plan adopt TLE9255 at Linux OS, and need to conform SocketCAN.

Have you any available resource getting started?

Regard,

Kevin

[Roy_Liu]

Could you elaborate a little bit more on the requirement? How would you adopt TLE9255 at Linux OS? what's the host MCU?

[KeTs_2342536]

Hi Roy,

Thanks of your reply.

Adopt QCS610 chip , add CAN bus interface and and need to conform SocketCAN.

Regard,

Kevin

[Di_W]

Hi KeTs,

If use Qualcomm QCS610 and QCS410 Application Processors and linux OS, please refer to TLE9255 datasheet and other documents as below:

https://www.infineon.com/cms/en/product/transceivers/automotive-transceiver/automotive-can-transceiv...

dw

[KeTs_2342536]

Hi DW,

Thanks of your reply.

I just see DS ,  did not see other driver and document.

Could you describe us more specifically in detail?

Regard,

Kevin

[Di_W]

Hi KeTs,

There is an application note at below link:

https://www.infineon.com/dgdl/Infineon-Z8F66334186-TLE9255W-PN_Configuration-ApplicationNotes-v01_00...

dw

[Kevin_Wu · Accepted solution]

Hi KeTs,

 TLE9255 is CAN Transceiver, not CAN controller, means MCU/MPU need connect a CAN controller to control transceiver to send and receive data with CAN net. 

  Looks like QCS610 don't integrate a CAN controller, so a SPI interface needed to connect CAN controller in your design.

Thanks, Kevin

[KeTs_2342536]

Hi Kevin Wu,

Got it, thanks of your reply.

Kevin Tsai