Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
do-while
Level 1
Level 1
10 questions asked 10 sign-ins 5 sign-ins

您好 我们现在正在使用TC399搭建平台,在使用过程中发现将ebu模块中的引脚配置为通用输出口并拉至高电平查看变量时显示为“1”,但是板件上用万用表测量依旧是低电平,这个模块中的引脚是需要什么其他的特殊配置吗?

0 Likes
1 Solution
Kunqiao_L
Moderator
Moderator
Moderator
First comment on blog First like given 25 likes received
0 Likes
3 Replies
Kunqiao_L
Moderator
Moderator
Moderator
First comment on blog First like given 25 likes received

Hi do-while,

what output pin are you using and what is your configuration set for the EBU and GPIO?

0 Likes
Kunqiao_L
Moderator
Moderator
Moderator
First comment on blog First like given 25 likes received

Hi do-while,

Any further question or progress about this issue? I didn't get your answer last time, just a follow up.

0 Likes
Kunqiao_L
Moderator
Moderator
Moderator
First comment on blog First like given 25 likes received
0 Likes