- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi everybody, I'll be purchasing a few XC2797 176Pin LQFP's in a few days so I thought I'd get setup now.
I'm new to these microcontrollers so can I have some help please.
1. How to download code to the MCU via the 2 wire DAP port on a stand-alone PCB. Connection from programmer to DAP.
2. What hardware / programmer do I need to connect to the MCU to download the code using DAP and not JTAG.
3. What IDE do I use to write my code.
4. Datasheets, and anything else you guys can suggest I will need to get the MCU up and running.
Thank you so much for your help and hope to her from you soon.
Pete 🙂
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The XC2797X is not an AURIX device, it is a legacy microcontroller that is not recommended for new designs.
You can get the documentation for this device on the Infineon website here .
For programming this device you can use Memtool with a miniwiggler.
You can use Tasking or Keil toolchains for code development.
You can review the XC2000 Easy kit manual that has a schematic for connecting the minwiggler.
XC2000 Series Starter Kit Board Manual
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The XC2797X is not an AURIX device, it is a legacy microcontroller that is not recommended for new designs.
You can get the documentation for this device on the Infineon website here .
For programming this device you can use Memtool with a miniwiggler.
You can use Tasking or Keil toolchains for code development.
You can review the XC2000 Easy kit manual that has a schematic for connecting the minwiggler.
XC2000 Series Starter Kit Board Manual
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi CWONDER, sorry for the late reply. Thank you for the info I'll check it out.
Have a great day. 🙂
Pete