公告

大中华汽车电子生态圈社区并入开发者社区- 更多资讯点击此

Tip / 登入 to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
oni1
Level 1
Level 1
5 replies posted 10 questions asked 5 questions asked
我想让一个PWM-CCU4在一个HRPWM的下降沿导通,另一个HRPWM的上升沿关断。但是PWM-CCU4配置界面好像没有看见像PWM一样用外部信号来分别控制开通和关断的功能。
0 点赞
5 回复数
ZERO_GO
Level 6
Level 6
5 sign-ins Welcome!
学习一下
0 点赞
阳东
Level 5
Level 5
10 comments on blog 5 comments on blog First comment on blog
搞定没?
0 点赞
oni1
Level 1
Level 1
5 replies posted 10 questions asked 5 questions asked
用external start,external stop能实现,但是在DAVE界面把HRPWM的信号接到PWM—CCU4的时候好像会和别的引脚分配或者信号连接冲突,不能随意连接信号,最后是把信号连到另一个HRPWM,再用那个HRPWM来控制PWM_CCU4
0 点赞
liliWinner
Level 6
Level 6
500 replies posted 250 replies posted 100 replies posted
mark
0 点赞
User22064
Level 5
Level 5
10 sign-ins First like given 5 sign-ins
关注一下
0 点赞