请问Aurix TC2XX SMU如何配置

公告

大中华汽车电子生态圈社区并入开发者社区- 更多资讯点击此

Tip / 登入 to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User22516
Level 2
Level 2
10 replies posted 5 replies posted 10 questions asked
我想使能 TC2xxL MCU的 SMU_FSP引脚,对应的SMU驱动如何配置呢?比如SmuAlarmGroup里怎么配置
0 点赞
3 回复数
User22516
Level 2
Level 2
10 replies posted 5 replies posted 10 questions asked
我看了下SmuAlarmGroup 里的行为应该是默认配置好了,可能需要修改一些操作,但是目前不清楚怎么修改
0 点赞
Twin
Level 5
Level 5
5 solutions authored First solution authored First like received
只要改SmuAlarmIntBeth和SmuAlarmFSP就行了,一个是配置故障后触发的中断,另一个是配置故障后是否使能FSP引脚动作
0 点赞
User22516
Level 2
Level 2
10 replies posted 5 replies posted 10 questions asked
谢谢大神!我在SmuAlarmFSP一栏,需要把所有的项都设置为SMU_ALARM_FSP_ENABLED吗?如果使用SMU_FSP引脚SmuAlarmIntBeh一栏该怎么选择呢,我看到有internal and external behavior的描述,SMU_FSP属于外部behavior吗?
0 点赞