- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, I'm now using TC364 to do some work. The chip in my hand was used by my colleagues. When I was trying to debug with mimiWiggler, ADS showed me the following error messages. And the program stops and starts all the time.
I wonder what caused this problem and is it possible to solve it?
Thank you.
Solved! Go to Solution.
- Labels:
-
AURIX
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you!
At first, I used the computer USB port to power TC364, and I connect it to a peripheral. Then, I powered the peripheral separately and the TC364 worked properly. I suspect this problem is caused by the insufficient power supply.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi chenj,
The chip is locked, looks like bricked by wrong UCB config. You can try a new chip and don't write UCB region.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you!
At first, I used the computer USB port to power TC364, and I connect it to a peripheral. Then, I powered the peripheral separately and the TC364 worked properly. I suspect this problem is caused by the insufficient power supply.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
👍